1600 SS Curtain Wall System

2-1/2" (63.5mm) sightlines
6" (152.4mm) or 7-1/2" (190.5mm) depth
Thermal performance
Structural silicone glazed SSG options
Blast mitigation

Where faster installation and performance meet

As budgets continue to tighten and construction schedules become more stringent, the demands for high quality products, fast installation, simplified fabrication, superior performance and design flexibility have increased. Kawneer's 1600 SS Curtain Wall systems and 1600 SS (Pre-glazed) Curtain Wall System offer a screw spline solution engineered to answer those demands and more. Offered in both stock lengths and/or fabricated, glazing contractors can benefit from the flexibility of providing fabrication and pre-glazing under controlled conditions in their own shop.

1600 SS Curtain Wall
With screw spline joinery, the product can be pre-assembled, joint sealed and delivered to the job site and installed as larger units, minimizing the installation in the field.

1600 SS (Pre-glazed) Curtain Wall
An expansion horizontal allows fully pre-glazed units (less pressure plates and covers) to be stacked on top of each other for a true unitized curtain wall option.

Key Features Include:
1600 SS is an outside glazed captured or SSG curtain wall system
1600 SS has 2-1/2" (63.5) sightlines
Standard 6" (152.4) or 7-1/2" (190.5) depth systems
Infill options up to 1-1/8" (28.6)
A pre-glazed option, (unitzed curtain wall) is also available
Perimeter seal can be installed at the pressure plate or mullion shoulder
1600 SS can be supplied fabricated and knocked down (KD) or in stock lengths
Interlocking mullion design to eliminate need for anit-buckling clips
Concealed fastener joinery creates smooth, monolithic appearance
EPDM gaskets and thermal break
Screw spline joinery method allowing for shop assembly
Corners available with shear block fabrication method
Offers integerated entrance framing systems
Silicone compatible glazing materials for long-lasting seals
Two color option
Permanodic® anodized finishes in 7 choices
Painted finishes in standard and custom choices

Optional Features
Captured system thermal separator can be pre-installed into pressure plate
Captured and SSG systems integrate with concealed GLASSvent® windows
Profit$Maker® Plus fabrication tooling die sets available
Captured system Integrates with standard Kawneer windows
Deep and bullnose covers available

Product Applications
Ideal for low to mid-rise applications where high performance is desired
It also is the right choice when it is desired to perform most of the assembly in the shop rather than the field

Environmental Features
Recycled Content (pre/post mixed): 50%
Recyclable: Yes
Sound Tranmission Class: 31.0
Reduces Solar Heat Gain: Yes
Contribures to daylighting: Yes
U-Value: 0.36
Solar Heat Gain Coefficient: 0.28
Visable Transmittance: 0.63
Environmental Product Declaration (EPD) Type III Product Specific: Yes

U-Factor, SHGC, VT and STC values are calculated using commercially available high performance glass. Please consult the glass manufacturer for actual values for your project.

Recycled content used is an average. Recycled content may range from 25-100%.