NUBLADO LIGHT

MATERIAL: Marble
COLOR RANGE: Beige/Taupe
INVENTORY
Availability Type Nominal Size Thickness Finish
Stock Tile 12"x24" 3/8" Honed
Stock Slab Varies by lot, see stock. 2CM Honed
STOCK - Items are generally in stock in select sizes. Inventory levels vary.
LIMITED STOCK - Boutique items. Available in smaller quantities due to material demand and availability.
QUICK SHIP - Items are available in quantities up to 2,000 SF and are available to ship in 7 business days or less.
SPECIAL ORDER - Items are not in stock. Lead times vary. Ask your sales consultant for details.

Refer to Inventory Overview PDF for "Availability" descriptions.

APPLICATIONS
Exterior Cladding Exterior Pavers Interior Walls Interior Floors Kitchen Countertops Other Countertops Wet Areas Traffic
No No Yes Yes No Yes Yes Medium Commercial
Refer to Applications Guide PDF for descriptions and most commonly used materials by application.

CARE + MAINTENANCE
Pre-Grouting Protection Initial Cleaning Protection
Natural Effect Protection
Color Enhancing Standard
Maintenance Special
Maintenance
NA Fila Cleaner Fila Fob Fila Stone Plus Fila Cleaner NA
Refer to Care + Maintenance PDF for descriptions and cleaning instructions.

IMPORTANT INFORMATION ABOUT THIS MATERIAL
Most marble has naturally occurring cracks and fissures. Expect to see factory repairs. The quality of the repair is dependent upon the factory of origin, the fabricator of the stone and the installer.

TECHNICAL PERFORMANCE SPECS
Rating ABRASION RESISTANCE
(The ability of a material to resist surface wear.)
Low This material has low abrasion resistance. It rates as a 1-3 on the Mohs scale. Light scratching will occur with exposure to sand and other abrasives. The finish will patina or dull over time as a result of this scratching. Always use a cutting board for countertop applications and walk-off mats at entrances in flooring applications.
Rating ABSORPTION
(The relative porosity of a material.)
High This material has a medium to high absorption rate. Always seal this material prior to use. Properly seal the material prior to grouting by applying several coats of sealant or until water beads up on the surface. Use Fila PRW200 to avoid staining from grout residues and specify a grout color that is similar to the color of the stone to avoid color bleeding into the material. Use low moisture setting materials. To reduce the appearance of stains, always wipe up spills immediately. Oil and highly-pigmented liquids can penetrate and stain the stone and may need poultice to remove the stain.
Rating ACID SENSITIVITY
(The likelihood of a material reacting to acidic foods or liquids.)
High This material is highly sensitive to acids. Acid etching will be highly visible on this material when exposed to acidic foods such as lemons or tomatoes. Do not use this material on kitchen countertop applications where acid etching is a concern. If acid etching is a concern, select a minimally sensitive material.
Rating FREEZE-THAW
(The ability of a material to withstand freeze-thaw cycles in exterior applications.)
Not Recommended Due to known material weakness or because this material has not been tested, this material is not approved for use in exterior applications.