AMP 200

High-Output Model

The AMP 200 (High Output Model) offers many of the same unique properties of the current ARDEX S-48 and S-58 technology platforms including:

Self-contained, all-in-one unit for mixing and pumping pre-blended, cementitious materials
Utilizes continuous, in-line mixing and rotor stator pumping
Controlled by variable frequency-drive system with an output range of up to 200 bags per hour
Higher output model, via 5.5Kw / 7.5 HP main motor
Operates on 220V, Three Phase
30A minimum on each leg/phase
Recommended for 35mm (1.5 inch) hoses
Variable frequency-drive system with an output range of up to 200 55-lb. bags an hour (6,000 sq.ft. at 1/4о per hour)
Continuous, in-line mixing and rotor stator pumping
In addition to these current features and benefits, the AMP 200 also contains:

Onboard water booster pump with a cam-lock adapter for easy hose clean out
Machinery that operates with only one 3-phase, gear motor for conveying, mixing and pumping; no buck booster required.
State of the art, electronic circuitry controls that replace capacitors which were subject to blow outs with power fluctuations
Accessible shaft in mixing tube and spray down nozzle for easy cleaning
AMP pumps 60Н vertical and 200Н horizontal via initial, higher rotor stator pressure setting of 350 PSI
User friendly with quieter over-all pumping system.
Made in the U.S.A. with some interchangeable S-48 / S-58 parts (rotor, stator, fittings and hoses)
All units reversible for operator safety