KEY EPOXY BINDER #510

DESCRIPTION
KEY RESIN #510 is a multipurpose epoxy binder for Key
Mortar Systems and Key Quartz Systems. This all purpose
epoxy resin is characterized as an excellent general purpose
material with good clarity and color retention. Its 100% solids
formulation makes it essentially odorless for installation in
occupied facilities.
KEY ADVANTAGES
ï Good Clarity & Color Retention
ï Low Odor During Application & Cure--Can be Applied in
Occupied Buildings
ï Low Viscosity--Good Trowelling & Wetting Properties
ï Available in ìFast Cureî Systems
ï Meets USDA requirements for food handling applications
KEY CONSIDERATIONS
ï Substrate temperature must be a minimum of 50ºF
(Contact Key Resin Company for Low Temperature
Cure).
ï Substrate must be free of dirt, waxes, curing agents,
and other foreign materials.
ï Pigmented version should not be used as a coating. COLOR SELECTION
KEY RESIN #510 is available in Clear and Key Standard
Colors. Custom Colors are available subject to laboratory
approval, minimum quantity, lead time for production, and
increased cost.
COMPOSITION
100% Solids Epoxy Resin with Aliphatic Amines
APPLICATION
SURFACE PREPARATION
Surface Preparation is the most critical portion of any
successful resinous flooring system application. All
substrates must be properly prepared as outlined in KEY
RESIN COMPANYíS TECHNICAL BULLETIN #1. Work
must be performed by trained or experienced contractors
or maintenance personnel. The KEY RESIN COMPANY
service department is pleased to answer any questions.
INSTALLATION
Installation of KEY RESIN #510 varies with your application
needs. For complete installation instructions, contact your
Key Representative or Key Resin Companyís Technical
Service.
CLEAN UP
Clean skin with soap and water. Tools and equipment
should be cleaned with xylene or lacquer thinner.