PRODUCT DESCRIPTION
AquaPox is a high quality low odor, two component
waterborne epoxy formulated as a high performance
architectural finish coat. AquaPox will produce a hard durable
surface which will hold up to repeated washing and abrasion
resistance.
TYPICAL USES
Formulated for use on residential and commercial interior or
exterior walls, equipment, structural and miscellaneous steel.
The low odor makes AquaPox an ideal product for schools,
hospitals, institutions, laboratories and food and beverage
manufacturing facilities. Not recommended for immersion
service.
BASES & COLORS-tintable with ACS Colorant
MC-1245 Tintable White Base 0-6 oz/gal
MC-1243 Deep Base 4-10 oz/gal
PHYSICAL PROPERTIES(MC-1245)
Resin Type Waterborne Epoxy
Clean-up Solvent Water
Gloss Semi-Gloss
Part B MF-0240 MF-0245
Finish @ 60° 55-65 40-50
Solids by Weight 46% 48%
Solids by Volume 37% 38%
Rec. Dry Film
Thickness per Coat (mils) 2-2.5 2-2.5
Wet Film to
Achieve DFT (mils) 5.5-6.5 5.5-6.5
Theoretical
Coverage @ 1 mil 593 ft2
/gal. 609 ft2
/gal.
Spread Rates1
@ Rec. DFT ft.² per gallon 237-296 243-304
VOCs 115 g/L 107 g/L
(Ranges from 107 to 115 depending on base and activator
used)
APPLICATION PARAMETERS @ 70° F (21° C)
& 50% R.H.2
Induction Time None
Pot Life 24 hours
Touch 30 min.
Recoat 4 hours
1 Spread rates are estimates based on products volume solids and make no
allowance for material loss during application. Actual spread rates may vary
dependent on applicator experience, surface porosity and texture.
2 Dry times may vary depending upon temperature, humidity and degree of air
movement.
Last Updated over 4 years
