Northern Frost Tubular / 16-6801

Encased in our standard Northern Frost material for the outer “frosted” diffuser shade, it creates the look of light captured by crystals. Due to the slight opacity of the frosted outer material, printing is not a standard option for the Northern Frost Collection, but you can choose from more than 45 laminated fabric colours for the inner shade. Make a metropolis in the sky. Choose from a wide array of colours to make your own material world.
Please note that measurements are based on the outer dimensions. Material and Diffuser options refer to the inner shade only. Standard inner diffuser is opal. The Finish selection applies to the canopy, electronics cover, and stem (if applicable). The Shade Material refers to the options available on the shade of the cylinder.

Diameter

1
checkedPlease Choose:unchecked12"unchecked16"unchecked18"
Height

2
checkedPlease Choose:unchecked28"unchecked40"
Material

3
Open Material Palettes

Open the material palettes to select from over 800 unique material options or provide custom material requests.

Reset your current selection
Current Selection:

No Material Selected

Open the material picker to make a selection.
Mounting

4
Please choose a mounting option.

Standard suspension length of 120"

Custom Lengths - Specify in the notes below

Black power cord is available with aircraft cable hardware.

Standard suspension length of 120"

Custom Lengths - Specify in the notes below

White power cord is available with aircraft cable hardware.

Standard suspension length of 120"

Custom Lengths - Specify in the notes below

Standard stem length is 48”, field-cuttable.

If longer stem is required, please specify length in the Additional Notes section below.
checkedPlease Choose:uncheckedAircraft Cable BLACKuncheckedAircraft Cable WHITEuncheckedStem Mount
Diffuser

5
Applies to bottom diffusers only (and middle, where applicable).
checkedOpal
Finish

6
Applies to stem and canopy.
checkedStandarduncheckedWhiteuncheckedBrushed AluminumuncheckedRALuncheckedCustom
Source

7
Standard LED is 50 Lumens per watt.



High Output (HO) LED - is 100 lumens per watt.



RGB is available, please contact Barbican
checked9W per linear foot (50 LPW) - Standardunchecked18W per linear foot (50 LPW)
Voltage

8
120 and 277 are standard options
checkedPlease Choose:unchecked120 Voltsunchecked277 Volts
Temperature

9
Colour temperature is a description of the warmth or coolness of a light source. It is a characteristic of visible light and is stated in units of absolute temperature, known as Kelvin (K).



3000K is Standard. Please note, other options will increase lead time.
checked3000 °Kunchecked2700 °Kunchecked3500 °Kunchecked4000 °K
Colour Rendering Index

10
A colour rendering index (CRI) is a quantitative measure of the ability of a light source to reveal the colours of various objects faithfully in comparison with an ideal or natural light source.



80 CRI is Standard. Please note, choosing 90 CRI will increase lead time and cost.
checked80 CRIunchecked90 CRI
Dimming Drivers

11
Sensor Ready and Integrated controls, as well as proprietary drivers can be added to Barbican fixtures. Please consult Barbican for availability of these options for this fixture.
checkedPlease Choose:uncheckedLED 0-10V DimminguncheckedLED TRIAC DimminguncheckedSensoruncheckedSensor InstalleduncheckedNo Dimming Driver
Additional Notes

12
Additional Notes:
Quantity

13
Your quote will take into account the number of items you require.
1
Review and Complete Your Quote

?